View G104XVN010_7749921.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

specification g ;91 preliminary version: 6hswhpehu 201 free datasheet http:///
g104xvn01.0 rev. 0.0 p age 1/24 g 104xvn01.0 ( v ) preliminary specifications ( ) final specifications module 1 0.4 inch color tft-lcd model name g104xvn01.0 c ustomer date checked & approved by note: this specification is subject to change without notice. approved by date leader feng 2012/9/11 prepared by yichih chen 2012/9/11 general display business division / au optronics corporation auo confidential for datamodul internal use only / 2013/1/17 data modul ag - www.data-modul.com free datasheet http:///
g104xvn01.0 rev. 0.0 p age 2/24 g 104xvn01.0 contents 1. operating precautions............................ .........................................................4 2. general description .........................................................................................5 2.1 display characteristics...........................................................................................................5 2.2 optical characteristics ...........................................................................................................6 3. functional block diagram ...............................................................................9 4. absolute maximum ratings ..........................................................................10 4.1 absolute ratings of tft lcd module .................................................................................10 4.2 absolute ratings of environment ........................................................................................10 5. electrical characteristics ..............................................................................11 5.1 tft lcd module .................................................................................................................. 11 5.2 backlight unit........................................................................................................................13 6. signal characteristics ...................................................................................14 6.1 pixel format image ..............................................................................................................14 6.2 scanning direction ...............................................................................................................14 6.3 tft-lcd interface signal description .................................................................................15 6.4 the input data format .........................................................................................................16 6.5 tft-lcd interface timing ....................................................................................................17 6.6 power on/off sequence ...................................................................................................18 7. connector & pin assignment ........................................................................19 7.1 tft-lcd signal (cn1): lvds connector ...........................................................................19 7.2 led backlight unit (cn2): driver connector ......................................................................19 7.3 led backlight unit (cn4): light bar connector..................................................................19 8. reliability test criteria ..................................................................................20 9. mechanical characteristics ...........................................................................21 9.1 lcm outline dimension (front view) ..................................................................................21 9.2 lcm outline dimension (rear view)...................................................................................22 10. label and packaging....................................................................................23 10.1 shipping label (on the rear side of tft-lcd display) ......................................................23 10.2 carton package .................................................................................................................23 11 safety.............................................................................................................24 11.1 sharp edge requirements.................................................................................................24 11.2 materials .............................................................................................................................24 11.3 capacitors...........................................................................................................................24 11.4 national test lab requirement..........................................................................................24 auo confidential for datamodul internal use only / 2013/1/17 data modul ag - www.data-modul.com free datasheet http:///
g104xvn01.0 rev. 0.0 p age 3/24 g 104xvn01.0 record of revision v ersion and date page old description new description 0.0 2012/07/15 all first edition 0.1 2012/09/11 22 lvds cn1 pin1 is on the right cn1 pin1 is on the left auo confidential for datamodul internal use only / 2013/1/17 data modul ag - www.data-modul.com free datasheet http:///
g104xvn01.0 rev. 0.0 p age 4/24 g 104xvn01.0 1. operating precautions 1) since front polarizer is easily damaged, please be cautious and not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long contact with water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with absorbent cotton or soft cloth. 5) since the panel is made of glass, it may be broken or cracked if dropped or bumped on hard surface. 6) to avoid esd (electro static discharde) damage, be sure to ground yourself before handling tft-lcd module. 7) do not open nor modify the module assembly. 8) do not press the reflector sheet at the back of the module to any direction. 9) in case if a module has to be put back into the packing container slot after it was taken out from the container, do not press the center of the led light bar edge. instead, press at the far ends of the led light bar edge softly. otherwise the tft module may be damaged. 10) at the insertion or removal of the signal interface connector, be sure not to rotate nor tilt the interface connector of the tft module. 11) tft-lcd module is not allowed to be twisted & bent even force is added on module in a very short time. please design your display product well to avoid external force applying to module by end-user directly. 12) small amount of materials without flammability grade are used in the tft-lcd module. the tft-lcd module should be supplied by power complied with requirements of limited power source (iec60950 or ul1950), or be applied exemption. 13) severe temperature condition may result in different luminance, response time and lamp ignition voltage. 14) continuous operating tft-lcd display under low temperature environment may accelerate lamp exhaustion and reduce luminance dramatically. 15) the data on this specification sheet is applicable when lcd module is placed in landscape position. 16) continuous displaying fixed pattern may induce image sticking. its recommended to use screen saver or shuffle content periodically if fixed pattern is displayed on the screen. auo confidential for datamodul internal use only / 2013/1/17 data modul ag - www.data-modul.com free datasheet http:///
g104xvn01.0 rev. 0.0 p age 5/24 g 104xvn01.0 2. general description this specification applies to the color active matrix liquid crystal display g104xvn01.0 composed of a tft-lcd display, a driver and power supply circuit, and a led backlight system. the screen format is intended to support xga (1024(h) x 768(v)) screen and 16.2m (rgb 8-bits) or 262k colors (rgb 6-bits). led driving board for backlight unit is included in g104xvn01.0. g104xvn01.0 designed with wide viewing angle; wide temperature and long life led backlight is well suited for industial applications. g104xvn01.0 is a rohs product. 2.1 display characteristics t he following items are characteristics summary on the table under 25 condition: items unit specifications screen diagonal [inch] 10.4 active area [mm] 210.4 (h) x 157.8 (v) pixels h x v 1024 x 3(rgb) x 768 pixel pitch [mm] 0.2055 x 0.2055 pixel arrangement r.g.b. vertical stripe display mode psa, normally black nominal input voltage vdd [volt] 3.3 (typ.) typical power consumption [watt] 6.0w all black pattern weight [grams] 350(typ.) physical size [mm] 238.6(h) x 175.8(v) x 6.5(d)(typ.) electrical interface 1 channel lvds surface treatment anti-glare, hardness 3h support color 16.2m / 262k colors temperature range operating storage (non-operating) [ o c] [ o c] -30 to +80 -30 to +80 rohs compliance rohs compliance auo confidential for datamodul internal use only / 2013/1/17 data modul ag - www.data-modul.com free datasheet http:///
g104xvn01.0 rev. 0.0 p age 6/24 g 104xvn01.0 2.2 optical characteristics the optical c h a r a c t e r i s t i c s a r e m e a s u r e d u n d e r s t a b l e c o n d i t i o n s a t 2 5 ( r o o m t e m p e r a t u r e ) : item unit conditions min. typ. max. remark white luminance [cd/m2] i f = 80ma/1 led line (center point) 300 400 - note 1 uniformity % 5 points 75 80 - note 2, 3 contrast ratio 1000 1400 - note 4 [msec] rising - 10 20 [msec] falling - 20 30 response time [msec] raising + falling - 30 50 note 5 [degree] [degree] horizontal (right) cr = 10 (left) - - 89 89 - - viewing angle [degree] [degree] vertical (upper) cr = 10 (lower) - - 89 89 - - note 6 red x tbd tbd tbd red y tbd tbd tbd green x tbd tbd tbd green y tbd tbd tbd blue x tbd tbd tbd blue y tbd tbd tbd white x 0.263 0.313 0.363 color / chromaticity coordinates (cie 1931) white y 0 .279 0.329 0.379 color gamut % - 60 - note 1: measurement method equipment pattern generator, power supply, digital voltmeter, luminance meter (sr_3 or equivalent) aperture 1 w i t h 5 0 c m v i e w i n g d i s t a n c e test point center environment < 1 lux lcd module sr_3 or equivalent measuring distance module driving equipment auo confidential for datamodul internal use only / 2013/1/17 data modul ag - www.data-modul.com free datasheet http:///
g104xvn01.0 rev. 0.0 p age 7/24 g 104xvn01.0 note 2: definition of 5 points position (display active area: 210.4mm (h) x 157.8mm (v)) 1 2 3 4 5 h /4 h /4 h /4 h /4 h w w /4 w /4 w /4 w /4 note 3: the luminance uniformity of 5 points is defined by dividing the minimum luminance values by the maximum test point luminance note 4: definition of contrast ratio (cr): note 5: definition of response time: t he output signals of photo detector are measured when the input signals are changed from white to black (falling time) and from black to white (rising time), respectively. the response time interval is between 10% and 90% of amplitudes. please refer to the figure as below. note 6: definition of viewing angle v i e w i n g a n g l e i s t h e m e a s u r e m e n t o f c o n t r a s t r a t i o 1 0 , a t t h e s c r e e n c e n t e r , o v e r a 180 horizontal and 180 vertical range (off-normal viewing angles). the 180 viewing angle range is broken down as below: 90 () horizontal left and right, and 90 () vertical high (up) and low (down). the measurement direction is typically perpendicular to the display surface with the screen rotated to its center to develop the desired minimum brightnes s of five poin ts w9 = m aximum brightness of five points contrast ratio (cr)= brightness on the white state brightness on the black state 100 90 10 0 % optical response white black white tf tr 90 10 0 optical response white black white tr auo confidential for datamodul internal use only / 2013/1/17 data modul ag - www.data-modul.com free datasheet http:///
g104xvn01.0 rev. 0.0 p age 8/24 g 104xvn01.0 measurement viewing angle. auo confidential for datamodul internal use only / 2013/1/17 data modul ag - www.data-modul.com free datasheet http:///
g104xvn01.0 rev. 0.0 p age 9/24 g 104xvn01.0 3. functional block diagram the following diagram shows the functional block of the 10.4 inch color tft/lcd module: auo confidential for datamodul internal use only / 2013/1/17 data modul ag - www.data-modul.com free datasheet http:///
g104xvn01.0 rev. 0.0 p age 10/24 g 104xvn01.0 4. absolute maximum ratings 4.1 absolute ratings of tft lcd module it em symbol min max unit logic/lcd drive voltage vin - 0.3 6 [volt] 4.2 absolute ratings of environment item symbol min max unit operating temperature top -30 +80 [ o c] operation humidity hop 5 95 [%rh] storage temperature tst -30 +80 [ o c] storage humidity hst 5 95 [%rh] note: maximum wet- b u l b s h o u l d b e 3 9 and no condensation. auo confidential for datamodul internal use only / 2013/1/17 data modul ag - www.data-modul.com free datasheet http:///
g104xvn01.0 rev. 0.0 p age 11/24 g 104xvn01.0 5. electrical characteristics 5.1 tft lcd module 5.1.1 power specification s ymbol parameter min typ max units remark vdd logic/lcd input voltage 3.1 3.3 3.5 [volt] i vdd lcd input current - 300 - [ma] vdd=3.3v at 60 hz, all black pattern p vdd lcd power comsumption - 0.99 - [watt] vdd=3.3v at 60 hz, all black pattern i rush lcd lcd inrush current - - 1.5 [a] note 1; vdd=3.3v black pattern, rising time=470us vdd rp allowable logic/lcd drive ripple voltage - - 100 [mv] p-p vdd=3.3v at 60 hz, all black pattern note 1: measurement condition: q3 ao6402 g d2 s d1 d5 d6 q3 ao6402 g d2 s d1 d5 d6 c1 1uf/16v c2 1uf/25v c3 0.01uf/25v f1 vr1 47k +12.0v vcc sw1 sw mag-spst 1 2 (high to low) control signal (lcd module input) r2 1k +3.3v r1 47k r2 1k 90% 10% vdd rising time 0v 3.3v 470 us vdd auo confidential for datamodul internal use only / 2013/1/17 data modul ag - www.data-modul.com free datasheet http:///
g104xvn01.0 rev. 0.0 p age 12/24 g 104xvn01.0 5.1.2 signal electrical characteristics input signals shall be low or hi-z state when vdd is off. note: lvds signal waveform. symbol item min. typ. max. unit remark vth differential input high threshold - - 100 [mv] vcm=1.2v vtl differential input low threshold 100 - - [mv] vcm=1.2v vid input differential voltage 100 400 600 [mv] vicm differential input common mode voltage 1.1 - 1.45 [v] vth/vtl=+-100mv auo confidential for datamodul internal use only / 2013/1/17 data modul ag - www.data-modul.com free datasheet http:///
g104xvn01.0 rev. 0.0 p age 13/24 g 104xvn01.0 5.2 backlight unit 5.2.1 parameter guideline for led backlight following characteristics are measured under a stabl e condition using a inve r t e r a t 2 5 . (room temperature): symbol parameter min. typ. max. unit remark vcc input voltage 10.8 12 12.6 [volt] i vcc input current - 0.5 - [a] 100% pwm duty p vcc power consumption - 6 - [watt] 100% pwm duty i inrush led inrush current - - 3 a v l ed rising time ~ 470us f pwm dimming frequency 200 - 20k [hz] on control voltage 2.5 3.3 5.5 volt v led on/off off control voltage - - 0.8 volt note 4,5 v pwm dim s wing voltage 2.5 3.3 5.5 [volt] dimming duty cycle 5 - 100 % i f led forward current - 80 - [ma] ta = 25 o c - - - [volt] i f = 80ma, ta = -30 o c - 29.7 32.4 [volt] i f = 80ma, ta = 25 o c v f led forward voltage - - - [volt] i f = 80ma, ta = 85 o c p led led power consumption - 4.75 - [watt] 2 string of led light bar operation life 50,000 - - hrs i f =80ma, ta= 25 o c note 1: ta means ambient temperature of tft-lcd module. note 2: vcc, i vcc , i rush led , p vcc are defined for led backlight.(100% duty of pwm dimming) note 3: i f , v f are defined for one channel led. there are two led channel in back light unit. note 4: pwm dimming function can be operated by pwm signal. pwm duty cycle can adjust white luminance. (pwm high: on and pwm low: off) note 5: pwm signal can not be floating and pull-down to ground when waiting. note 6: if g104xvn01.0 module is driven by high current or at high ambient temperature & humidity condition. the operating life will be reduced. note 7: operating life means brightness goes down to 50% initial brightness. minimum operating life time is estimated data. auo confidential for datamodul internal use only / 2013/1/17 data modul ag - www.data-modul.com free datasheet http:///
g104xvn01.0 rev. 0.0 p age 14/24 g 104xvn01.0 6. signal characteristics 6.1 pixel format image following figure shows the relationship between inpu t signal and lcd pixel format. 1 st pixel 2 nd pixel 1023 th pixel 1024 th pixel 1 st line r g b r g b r g b r g b 768 th lin r g b r g b r g b r g b 6.2 scanning direction the following figures show the image seen from the f ront view. the arrow indicates the direction of scan. fig. 1 normal scan (pin24, reverse = low or nc) fig. 2 reverse scan (pin24, reverse = high) auo confidential for datamodul internal use only / 2013/1/17 data modul ag - www.data-modul.com free datasheet http:///
g104xvn01.0 rev. 0.0 p age 15/24 g 104xvn01.0 6.3 tft-lcd interface signal description the module using a lvds receiver embaded in auos as ic. lvds is a differential signal technology for lcd interface and a high-speed data transfer device. pin no. signal name description 1 nc no connection 2 gnd ground 3 rin3+ positive lvds differential data input (+) 4 rin3- negative lvds differential data input (-) 5 gnd ground 6 clk+ clock signal (+) 7 clk- clock signal (-) 8 gnd ground 9 rin2+ positive lvds differential data input (+) 10 rin2- negative lvds differential data input (-) 11 gnd ground 12 rin1+ positive lvds differential data input (+) 13 rin1- negative lvds differential data input (-) 14 gnd ground 15 rin0+ positive lvds differential data input (+) 16 rin0- negative lvds differential data input (-) 17 gnd ground 18 nc no connection 19 gnd ground 20 sel6/8 selection for 6 bits/8bits lvds data input low or nc -> 8 bit input mode high -> 6bit input mode 21 nc no connection 22 nc no connection 23 nc no connection 24 reverse reverse panel function (display rotation) 25 gnd ground 26 gnd ground 27 gnd ground 28 vcc power supply: +3.3v 29 vcc power supply: +3.3v 30 vcc power supply: +3.3v note 1: input signals shall be in low status when vdd is off. note 2: high stands for 3.3v, low stands for 0v, nc stands for no connection. note 3: rsv stands for reserved. auo confidential for datamodul internal use only / 2013/1/17 data modul ag - www.data-modul.com free datasheet http:///
g104xvn01.0 rev. 0.0 p age 16/24 g 104xvn01.0 6.4 the input data format 6.4.1 sel68 sel68 = high for 6 bits lvds input sel68 = low or nc for 8 bits lvds input note1: please follow pswg. note2: r/g/b data 7:msb, r/g/b data 0:lsb s ignal name description remark r7 r6 r5 r4 r3 r2 r1 r0 red data 7 red data 6 red data 5 red data 4 red data 3 red data 2 red data 1 red data 0 red-pixel data for 8bits lvds input msb: r7 ; lsb: r0 for 6bits lvds input msb: r5 ; lsb: r0 g7 g6 g5 g4 g3 g2 g1 g0 green data 7 green data 6 green data 5 green data 4 green data 3 green data 2 green data 1 green data 0 green-pixel data for 8bits lvds input msb: g7 ; lsb: g0 for 6bits lvds input msb: g5 ; lsb: g0 b7 b6 b5 b4 b3 b2 b1 b0 blue data 7 blue data 6 blue data 5 blue data 4 blue data 3 blue data 2 blue data 1 blue data 0 blue-pixel data for 8bits lvds input msb: b7 ; lsb: b0 for 6bits lvds input msb: b5 ; lsb: b0 rxclkin lvds data clock de data enable signal when the signal is high, the pixel data shall be valid to be displayed. note: output signals from any system shall be low or hi-z state when vdd is off. ns - like format auo confidential for datamodul internal use only / 2013/1/17 data modul ag - www.data-modul.com free datasheet http:///
g104xvn01.0 rev. 0.0 p age 17/24 g 104xvn01.0 6.5 tft-lcd interface timing 6.5.1 timing characteristics s ignal symbol min. typ. max. unit clock frequency 1/ t clock 50 65 81 mhz period t v 776 806 1023 active t vd 768 768 768 vertical section blanking t vb 8 38 256 t line period t h 1054 1344 2047 active t hd 1024 1024 1024 horizontal section blanking t hb 30 320 1023 t clock frame rate f 50 60 75 hz note : de mode. 6.5.2 input timing diagram dotclk de t h t hb t hd de t v t vb t vd input timing definition ( de mode) t clock input data pixel 1 pixel 2 pixel 3 pixel n-1 pixel n invaild d ata invaild data pixel 1 auo confidential for datamodul internal use only / 2013/1/17 data modul ag - www.data-modul.com free datasheet http:///
g104xvn01.0 rev. 0.0 p age 18/24 g 104xvn01.0 6.6 power on/off sequence vdd power and lamp on/off sequence is as below. inte rface signals are also shown in the chart. signals from any system shall be hi-z state or low level when vdd is off. power on/off sequence timing value units parameter min. typ. max. t1 0.5 - 10 [ms] t2 30 40 50 [ms] t3 200 -- -- [ms] t4 0.5 -- 10 [ms] t5 10 - - [ms] t6 10 - - [ms] t7 0 - - [ms] t8 10 - - [ms] t9 -- -- 10 [ms] t10 110 -- -- [ms] t11 0 16 50 [ms] t12 - - 10 [ms] t13 1000 - - [ms] the above on/off sequence should be applied to avoid abnormal function in the display. please make sure to turn off the power when you plug the cable into the input connector or pull the cable out of the connector. auo confidential for datamodul internal use only / 2013/1/17 data modul ag - www.data-modul.com free datasheet http:///
g104xvn01.0 rev. 0.0 p age 19/24 g 104xvn01.0 7. connector & pin assignment physical interface is described as for the connector on module. these connectors are capable of accommodating the following signals and will be following components. 7.1 tft-lcd signal (cn1): lvds connector connector name / designation signal connector manufacturer jae or compatible connector model number fi-xpb30srlahf11 or compatible adaptable plug fi-x30hl or compatible or compatible pin no. symbol pin no. symbol 1 nc 16 rin0- 2 gnd 17 gnd 3 rin3+ 18 nc 4 rin3- 19 gnd 5 gnd 20 sel6/8 6 clk+ 21 nc 7 clk- 22 nc 8 gnd 23 nc 9 rin2+ 24 reverse 10 rin2- 25 gnd 11 gnd 26 gnd 12 rin1+ 27 gnd 13 rin1- 28 vcc 14 gnd 29 vcc 15 rin0+ 30 vcc 7.2 led backlight unit (cn2): driver connector connector name / designation lamp connector manufacturer entery or compatible connector model number 3808k-f05n-02r or compatible mating model number h208kCp05n-02b or compatible pin no. symbol description pin1 vcc 12v input pin2 vcc 12v input pin3 gnd gnd pin4 dimming pwm pin5 on/off 3.3v or 5v-on,0v-off 7.3 led backlight unit (cn3): light bar connector auo confidential for datamodul internal use only / 2013/1/17 data modul ag - www.data-modul.com free datasheet http:///
g104xvn01.0 rev. 0.0 p age 20/24 g 104xvn01.0 connector name / designation lamp connector manufacturer entery or compatible connector model number h208kCp03n-02r or compatible mating model number(cn3) 3808k-f03n-02b or compatible pin no. symbol description color pin1 h led anode red pin2 l led cathode white pin3 l led cathode white 8. reliability test criteria it ems required condition note temperature humidity bias 40 , 90%rh, 300 hours high temperature operation 80 , 300 hours low temperature operation -30 , 300 hours hot storage 80 , 300 hours cold storage -3 0 , 300 hours thermal shock test - 2 0 / 30 min, 6 0 / 30 min, 100cycles, 40 minimun ramp rate hot start test 80/ 1hr min. power on/off per 5 minutes, 5 times cold start test -30/ 1hr min. power on/off per 5 minutes, 5 times shock test (non-operating) 50g, 20ms, half-sine wave, ( x, y, z) vibration test (non-operating) 1.5g, (10~200hz, sine wave) 30 mins/axis, 3 direction (x, y, z) on/off test on/10 sec, off/10 sec, 30,000 cycles esd contact discharge: 8kv, 150pf(330? ) 1sec, 8 points, 25 times/ point air discharge: 15kv, 150pf(330? ) 1sec, 8 points, 25 times/ point note 1 emi 30-230 mhz, limit 40 dbu v/m, 230-1000 mhz, limit 47 dbu v/m note1: according to en61000-4-2, esd class b: some performance degradation allowed. no data lost self-recoverable. no hardware failures. note2: water condensation is not allowed for each test items. each test is done by new tft-lcd module. dont use the same tft-lcd module repeatedly for reliability test. the reliability test is performed only to examine the tft-lcd module capability. to inspect tft-lcd module after reliability test, please store it at room temperature and room humidity for 24 hours at least in advance. auo confidential for datamodul internal use only / 2013/1/17 data modul ag - www.data-modul.com free datasheet http:///
g104xvn01.0 rev. 0.0 p age 21/24 g 104xvn01.0 9. mechanical characteristics 9.1 lcm outline dimension (front view) auo confidential for datamodul internal use only / 2013/1/17 data modul ag - www.data-modul.com free datasheet http:///
g104xvn01.0 rev. 0.0 p age 22/24 g 104xvn01.0 9.2 lcm outline dimension (rear view) auo confidential for datamodul internal use only / 2013/1/17 data modul ag - www.data-modul.com free datasheet http:///
g104xvn01.0 rev. 0.0 p age 23/24 g 104xvn01.0 10. label and packaging 10.1 shipping label (on the rear side of tft-lcd display) 10.2 carton package note: 1. max. capacity: 40pcs lcd modules / per carton 2. max. weight: 14.5 kg / per carton 3. the outside dimension of carton is 458(l) mm x 412(w) mm x 368(h) mm auo confidential for datamodul internal use only / 2013/1/17 data modul ag - www.data-modul.com free datasheet http:///
g104xvn01.0 rev. 0.0 p age 24/24 g 104xvn01.0 11 safety 11.1 sharp edge requirements there will be no sharp edges or comers on the display assembly that could cause injury. 11.2 materials 11. 2.1 toxicity there will be no carcinogenic materials used anywhere i n the display module. if toxic materials are used, they will be reviewed and approved by the responsible auo toxicologist. 11.2.2 flammability all components including electrical components that do no t meet the flammability grade ul94-v1 in the module will complete the flammability rating exception approval process. the printed circuit board will be made from material rated 94-v1 or better. the actual ul flammability rating will be printed on the printed circuit board. 1 1.3 capacitors if any polarized capacitors are used in the display asse mbly, provisions will be made to keep them from being inserted backwards. 11.4 national test lab requirement the display module will satisfy all requirements for compliance to: ul 1950, first edition u.s.a. information technology equipment auo confidential for datamodul internal use only / 2013/1/17 data modul ag - www.data-modul.com free datasheet http:///
2 d i s p l a y s and embedded solutions data mo dul ag | l andsberger str. 322 | 80687 munich | t el. +49-89-56017-0 | fax +49-89-56017-119 | www.data-modul.com d ata m odul headquarters munich landsberger str. 322 d-80687 munich - germany phone: +49-89-56017-0 fax: +49-89-56017-119 www.data-modul.com sales o ffice hamburg borsteler chaussee 51 d-22453 hamburg - germany phone: +49-40-42947377-0 sales o ffice duesseldorf fritz-vomfelde-str. 8 d-40547 duesseldorf - germany phone: +49-211-52709-0 sales o ffice scandinavia lundsmindevej 5 dk-6000 kolding - denmark phone: +45-75-224477 d ata m odul france 7 rue saint christophe f-60300 baron - franc e phone: +33-3-44549699 d ata m odul italy, s.r.l. regus center senigallia via senigallia 18/2 i-20161 milano - italy phone: +39-02-64672509 d ata m odul iberia, s. l. c/ adolfo prez e squivel 3 e dificio las americas iii oficina 40 28230 parque e mpresarial las rozas / madrid - spain phone: +34-916-366458 d ata m odul suisse gmbh stationsstr. 57 ch-8606 n?nikon - switzerland phone: +41-44-94091-50 d ata m odul l td. / uk collins building 3 vigo place - aldridge - walsall ws9 8ug - united kingdom phone: +44-1922-457358 d ata m odul inc. / u sa 275 marcus blvd, unit k hauppauge, ny 11788 - usa phone: +1-631-951-0800 tft@data-modul.com | www.data-modul.com d i s p l a y s and embedded solutions free datasheet http:///

▲Up To Search▲

Price & Availability of G104XVN010

	To Download G104XVN010 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .